Simulationsergebnisse, Prüfdaten, Forschungsdaten) zur Unterstützung interner Entscheidungsprozesse und regulatorischer Positionierungen Enge Zusammenarbeit mit Engineering, R&D und Produktentwicklung sowie Einbringung wissenschaftlicher und regulatorischer Expertise zur Entwicklung sicherer und zukunftsfähiger Produkte Mitwirkung an Forschungsaktivitäten und Generierung wissenschaftlicher Evidenz zur Verwendung in regulatorischen Diskussionen und Normungsgremien Erstellung technischer Dokumentationen, Berichte und Präsentationen für interne Stakeholder sowie externe regulatorische und wissenschaftliche Zielgruppen Unterstützung der CYBEX-Vertretung in Industrie-, Regulierungs- und Normungsgremien durch datenbasierte fachliche Beiträge Mitwirkung bei der Präsentation wissenschaftlicher Arbeiten von CYBEX auf Konferenzen, Workshops und Expertengremien Dein Weg zu CYBEX: Abgeschlossenes Studium im Bereich Ingenieurwesen, Data Science, Statistik, Biomechanik, Physik oder einer vergleichbaren naturwissenschaftlich-technischen Fachrichtung Fundierte Kenntnisse oder starkes Interesse im Bereich Datenanalyse, Modellierung und virtueller Simulation – idealerweise in einem sicherheitskritischen oder ingenieurwissenschaftlichen Umfeld Erfahrung in der Anwendung von Human Body Models (HBMs) in virtuellen Crashsimulationen zur Verletzungsprognose ist sehr wünschenswert Fähigkeit, komplexe Daten zu analysieren, Muster zu erkennen und Ergebnisse in klare Schlussfolgerungen sowie Handlungsempfehlungen zu überführen Sehr gute schriftliche und mündliche Kommunikationsfähigkeiten mit der Fähigkeit, technische Inhalte adressatengerecht aufzubereiten Interesse oder idealerweise erste Erfahrungen im Bereich Kindersicherheit, Kinderrückhaltesysteme, Insassenbiomechanik oder Verletzungsprävention sind von Vorteil Ausgeprägte Team- und Kommunikationsfähigkeit sowie Freude an der interdisziplinären Zusammenarbeit zwischen Engineering, Forschung, Regulierung und kommerziellen Bereichen Neugierde, Lernbereitschaft und Flexibilität in einem dynamischen internationalen Umfeld Bereitschaft zu gelegentlichen Dienstreisen innerhalb Deutschlands und international Fließende Deutsch- und Englischkenntnisse in Wort und Schrift Wir agieren international und haben Mitarbeiter und Mitarbeiterinnen aus über 29 Nationen.
Your Qualifications Ability to travel up to 90 percent domestically and internationally, using all modes of public transportation; provides his or her own hand tools; must be on call to travel or provide occasional telephone assistance to customers after standard work hours and on weekends; must be able to work in a high production environment under stress and demanding circumstances.
Your Qualifications Ability to travel up to 90 percent domestically and internationally, using all modes of public transportation; provides his or her own hand tools; must be on call to travel or provide occasional telephone assistance to customers after standard work hours and on weekends; must be able to work in a high production environment under stress and demanding circumstances.
Project Supervision: Manage all on-site construction activities to ensure multi projects are executed according to the design, schedule, and quality standards Team Coordination: Lead and coordinate site teams (handymen), including subcontractors, and suppliers to maintain workflow and productivity Health & Safety: Enforce health and safety regulations, ensuring a safe working environment for all site personnel, particularly in accordance with Cell Production room specifications Problem Solving: Identify potential issues or delays and implement solutions to mitigate risks or setbacks - and escalate topics to Construction Manager, when needed Bachelor's degree or equivalent in Construction Management, Civil Engineering, or a related field (preferred) Proven experience as a Site Manager or in a similar role within the construction industry Proficiency in English written and verbal communication is a must - German or Polish is advantageous Strong decision-making skills and get-things-done attitude Proficiency in construction management software and tools (Navisworks, Bluebeam, MS-Office) Pleasant working atmosphere Varied tasks in a renowned company Ihr Kontakt Ansprechpartner Marie Scholl Referenznummer 856580/1 Kontakt aufnehmen E-Mail: marie.scholl@hays.de Anstellungsart Freiberuflich für ein Projekt
Project Supervision: Manage all on-site construction activities to ensure multi projects are executed according to the design, schedule, and quality standards Team Coordination: Lead and coordinate site teams (handymen), including subcontractors, and suppliers to maintain workflow and productivity Health & Safety: Enforce health and safety regulations, ensuring a safe working environment for all site personnel, particularly in accordance with Cell Production room specifications Problem Solving: Identify potential issues or delays and implement solutions to mitigate risks or setbacks - and escalate topics to Construction Manager, when needed Bachelor's degree or equivalent in Construction Management, Civil Engineering, or a related field (preferred) Proven experience as a Site Manager or in a similar role within the construction industry Proficiency in English written and verbal communication is a must - German or Polish is advantageous Strong decision-making skills and get-things-done attitude Proficiency in construction management software and tools (Navisworks, Bluebeam, MS-Office) Pleasant working atmosphere Varied tasks in a renowned company Ihr Kontakt Ansprechpartner Marie Scholl Referenznummer 856580/1 Kontakt aufnehmen E-Mail: marie.scholl@hays.de Anstellungsart Freiberuflich für ein Projekt
The candidate will be registered as a doctoral student at Dresden University of Technology. The EU Mobility Rule applies. That is, the candidate must not have resided or carried out her/his main activity (work, studies, etc.) in the host country (in this case Germany) for more than 12 months in the 3 years immediately before the recruitment date.
Key responsibilities include: Maintain maintenance plans for production equipmentProvide technical feedback and sharing of daily experience for existing product portfolioExecute/Implement Process & Equipment related to RRC standardsPerform Failure Analysis of Process and Equipment issues, identify Root causes and develop repair procedure including component levelProvide technical expertise and support to all topics related to released equipment and proceduresInvolvement in other projects within the scope of process engineering’s skills and capabilitiesActive application of Problem-Solving tools and methodologyFamiliar with programming languages such as C/C++, PythonAt least 2 years’ experience in manufacturing / mass production environmentProfessional experience in automation Electronics, automationPerformed maintenance and troubleshooting for production equipmentNative-language VietnameseFluent English (written and spoken) is a must]MES/SAP experience is advantageWork for a German technology company in a truly international environmentKey leadership role in a growing high-tech manufacturing siteHigh level of responsibility with strong influence on processes and standardsClose cooperation with international experts and headquartersLong-term development opportunities in a stable and innovative company
. • Responsible for observing and following all Environmental, Health and Safety rules and procedures. Your Profile • Must be able to read, write, and speak English. • Effective verbal and written communication skills. • Self-motivated and results oriented. • Ability to work in a team oriented environment. • Good manual dexterity and hand/eye coordination. • Due to the nature of work performed at this facility, US Person status may be required.
. • Responsible for observing and following all Environmental, Health and Safety rules and procedures. Your Profile • Must be able to read, write, and speak English. • Effective verbal and written communication skills. • Self-motivated and results oriented. • Ability to work in a team oriented environment. • Good manual dexterity and hand/eye coordination. • Due to the nature of work performed at this facility, US Person status may be required.
. • Responsible for observing and following all Environmental, Health and Safety rules and procedures. Your Profile • Must be able to read, write, and speak English. • Effective verbal and written communication skills. • Self-motivated and results oriented. • Ability to work in a team oriented environment. • Good manual dexterity and hand/eye coordination. • Due to the nature of work performed at this facility, US Person status may be required.
. • Responsible for observing and following all Environmental, Health and Safety rules and procedures. Your Profile • Must be able to read, write, and speak English. • Effective verbal and written communication skills. • Self-motivated and results oriented. • Ability to work in a team oriented environment. • Good manual dexterity and hand/eye coordination. • Due to the nature of work performed at this facility, US Person status may be required.
Please note on this occasion we are unable to provide sponsorship for visa applicants for this post, as such applicants must hold the right to work in the UK to be eligible. How to apply Please apply via this link: Andor Technology - Oxford Instruments Careers (oxinst.com) Informal enquiries or to request a full role profile please contact Louise Dooley Senior Talent Acquisition Specialist via email to louise.dooley@oxinst.com Why Oxford Instruments Andor?
The candidate will be registered as a doctoral student at Dresden University of Technology. The EU Mobility Rule applies. That is, the candidate must not have resided or carried out her/his main activity (work, studies, etc.) in the host country (in this case Germany) for more than 12 months in the 3 years immediately before the recruitment date.
. • Responsible for observing and following all Environmental, Health and Safety rules and procedures. Your Profile • Must be able to read, write, and speak English. • Effective verbal and written communication skills. • Self-motivated and results oriented. • Ability to work in a team oriented environment. • Good manual dexterity and hand/eye coordination. • Due to the nature of work performed at this facility, US Person status may be required.
If you're a creative thinker with a passion for 3D design and event experiences, this role could be a perfect fit for you. Please click "Apply Now." All applicants must submit a portfolio or showreel for consideration. All applications will be handled in strict confidence and used solely for recruitment purposes.
Please note on this occasion we are unable to provide sponsorship for visa applicants for this particular post, as such applicants must hold the right to work in the UK to be eligible. Why Oxford Instruments Andor? Our company values of being Inclusive, Innovative, Trusted and Purposeful are at the core of everything we do for our customers and our teams.
For enquiries or to request a full role profile please contact Louise Dooley, Senior Talent Acquisition Specialist (louise.dooley@oxinst.com) Please note on this occasion we are unable to provide sponsorship for visa applicants for this particular post, as such applicants must hold the right to work in the UK to be eligible. Why Oxford Instruments Andor? Our company values of being Inclusive, Innovative, Trusted and Purposeful are at the core of everything we do for our customers and our teams.
Your Contribution Provide for corrective, preventative, predictive, safety and emergency repairs to electrical machinery and electronic equipment utilized in LNS's manufacturing processes.Ability to troubleshoot facility wiring, electronic controls, including servo/stepper motor controls, process equipment and general mechanical equipment.Completes accurate records via an Enterprise Asset Management (EAM)Troubleshoot machine and system failures on a timely basis in a production environment; provide appropriate corrective actions.Use schematics, blueprints & diagrams to find the sequence of operations to aid in effective troubleshooting of electronic hardware, vacuum systems, hydraulic systems, basic mechanical systems, and pneumatic systems.Calibrate electronic controllers and maintain accurate records.Provides project support on internal projects.Assist Engineering personnel in conducting process and project evaluation and problem solving, must work in a team environment.Assist in building and grounds maintenance when needed.Moves, assembles, installs, adjusts, repairs and services all standard production machinery and equipment.Works overtime as required and responds to emergency call-ins.
Background & experience • MSc or PhD in Chemical Engineering, Materials Science, Chemistry or a related field • 7+ years of experience in chemical and/or polymer manufacturing • Solid experience with solid propellants, energetic materials, composites and/or defence/aerospace materials (must have) • Proven track record in scale-up from lab to industrial production, including definition of process windows and critical parameters • Experience managing or leading an analytical laboratory and working closely with QC/QA • Familiarity with ISO / AQAP / defence quality systems and safety regulations for hazardous substances • Experience with SPC, root-cause analysis tools (5 Whys, Fishbone, FMEA) and data-driven process improvements • Working knowledge of MES/ERP systems and process data management is an advantage Personal competencies • High level of precision, accountability, and safety awareness – you do not compromise on quality or HSE • Clear, structured communicator who can translate complex chemistry and data into practical decisions for production teams and management • Strong people leadership skills – able to set direction, coach and develop specialists and technicians, and create engagement in a multicultural environment • Emotionally resilient and comfortable working in a fast-paced, scale-up setting with changing priorities • Curious, proactive, and solution-oriented, with a genuine interest in both technology and its real-world impact At FPRT, you will join at a pivotal moment, where you can directly influence how processes, standards and culture are shaped in Denmark.
Background & experience • MSc or PhD in Chemical Engineering, Materials Science, Chemistry or a related field • 7+ years of experience in chemical and/or polymer manufacturing • Solid experience with solid propellants, energetic materials, composites and/or defence/aerospace materials (must have) • Proven track record in scale-up from lab to industrial production, including definition of process windows and critical parameters • Experience managing or leading an analytical laboratory and working closely with QC/QA • Familiarity with ISO / AQAP / defence quality systems and safety regulations for hazardous substances • Experience with SPC, root-cause analysis tools (5 Whys, Fishbone, FMEA) and data-driven process improvements • Working knowledge of MES/ERP systems and process data management is an advantage Personal competencies • High level of precision, accountability, and safety awareness – you do not compromise on quality or HSE • Clear, structured communicator who can translate complex chemistry and data into practical decisions for production teams and management • Strong people leadership skills – able to set direction, coach and develop specialists and technicians, and create engagement in a multicultural environment • Emotionally resilient and comfortable working in a fast-paced, scale-up setting with changing priorities • Curious, proactive, and solution-oriented, with a genuine interest in both technology and its real-world impact At FPRT, you will join at a pivotal moment, where you can directly influence how processes, standards and culture are shaped in Denmark.